TANGSHAN JIXIN MACHINERY MANUFACTURING CO., LTD.

What is the operation process of trademark die - cutting machine?

​The trademark die cutting machine will pre-open the product model "that is, the knife die" according to the shape of the product drawing punching, punching up and down.

Self-adhesive die cutting machine maintenance details

It's easier to apply the sticker on the back when it's full. The ink absorption of the paper coated on the adhesive surface is poor. When printing, try using original ink instead of 6 mixed oils. Add some adhesives and release agents; Do not add dry oil in hot weather. The back of the bottom plate gets dirty easily. Often used powder solution, so that the ink does not shine, does not pollute the environment, has an impact on the accuracy of the offset press.

Trademark die - cutting machine die - cutting table and the shape of the press - cutting mechanism are flat - shaped

The application range and characteristics of self-adhesive die cutting machine

Self-adhesive die cutting machine is the replacement of traditional mechanical die cutting products. Its big advantage is that under the control of the computer, you can set any cutting pattern, no need to make templates, save the trouble of making knife die, greatly shorten the die cutting sample, delivery time. For the printing industry, self-adhesive die cutting machine is a more familiar printing equipment.

About the trademark die - cutting machine operation skills, trademark printing press manufacturers for you to answer

Generally, there is an emergency stop switch on the upper right side of the trademark die-cutting machine panel. When the switch is pressed down, the whole machine is off. If the main power supply is closed, the indicator light is not bright, it should be checked whether the switch is still in the low position. If it is in the low position, the switch should be rotated in the direction of the key head on the switch cover.

Trademark die cutting machine coated foam four reasons, trademark printing press to answer for you

Part of the trademark die cutting machine color packaging is the use of bidirectional tensile polypropylene film, laminating products will appear black or foaming phenomenon.